PCR-WE/WE2 series – NDTC
skip to Main Content
Search
Generic filters

NDTRADINGCANADA

AC power supply

PCR-WE/WE2 series

Ultra-Compact AC/DC Programmable Power Supply (CV/CF) : 15 Models

The PCR-WE/WE2 is a series of multifunctional switching AC power supplies that combines accurate, high-power output with an ultra-compact design. The 15 model line-up ranges from 1 kVA to 36 kVA AC/DC with single & 3 phase variable output from 6 kVA and up. The PCR-WE/WE2 also features a regenerative mode*1 that can drastically reduce power consumption and cut operating costs. The PCR-WE/WE2 also supports mix-and-match parallel operation*2 up to 144 kVA for large-scale test systems. Output frequency up to 5 kHz is also available with all models, which is critical for AC applications in avionic industries.
*1: Only “R” models (PCR-WE2R) with 3-phase 200 V input. For regeneration within the installation site only.
*2: Parallel operation is available for 6 kVA models and up with a maximum of 4 units. Same model combination is not required. Up to 48 kVA per phase.

Features

  • Compact Size!
    been drastically reduced by 60%. Efficiency has also been increased by approximately 7%, for an overall high efficiency of approximately 85%.
  • Up to 144 kVA with Parallel Operation
    Parallel operation is available on all models by simply connecting an optional parallel operation cable. This feature is available even among different models for a wide range of high power.
    *Same input voltage required for 6 kVA models and higher.
  • Extremely Power Dense 36 kVA Chassis
    The PCR-WE/WE2 form factor has been significantly improved, occupying the absolute minimum amount of precious space in your testing facility. The form factor is even further optimized in high powermodels.
  • Low Ripple Noise
    Achieves an extremely low switching noise for a PWM inverter-type AC power supply, with ripple noise as low as 0.25 rms with 1 kVA – 6 kVA models. The PCR-WE series even boasts similar noise performance with the PCR-LE/LE2 linear amplifier power supply series. The compact, high-power design of the PCR-WE/WE2 has been achieved with absolutely no compromises to ripple noise performance.
  • 100% Regeneration Capability, No Time Limit
    The PCR-WE2R models are capable of 100% power regeneration. The power regeneration feature is available with absolutely no reverse load flow time limit. (30% for PCR-LE/LE2)
    *Regeneration is limited within installation site. Only available in “R” models (PCR-WE2R) with 3-phase 200 V input.
  • Output Frequency up to 5 kHz
    It has a maximum output frequency up to 5 kHz for critical applications in the defense and avionics industries. The frequency performance of the PCR-WE allows for simulation of sharp voltage fluctuations required for airborne electronic equipment testing. Furthermore, the compact 6kVA/6U form factor allows for the easy preparation of an automated, one-rack testing system without requiring a costly, specialized power source installation space.
  • DC Output 100% of Rated Power
    The PCR-WE/WE2 series enables DC output up to 100% of the AC rated power output.
  • LAN, USB, RS232C Standard Digital Interface
    The PCR-WE/WE2 series includes a flexible digital interface for users utilizing LAN, USB, and RS232C communication interfaces (GPIB factory option available). LAN connection is LXI compliant, allowing you to monitor and control your device wherever you are via computer, smartphone, or tablet web browser. This feature is particularly important when conducting critical AC tests in anechoic chambers/shield rooms.
  • Power Saving Mode *6 kVA models and higher
  • Power Line Error Simulation
    The PCR-WE/WE2 series can simulate various power line abnormalities such as power outages, voltage drops (dips) and voltage increases (pops). This feature is useful for the testing of power-source switches and various electronic devices.

Line Up

Model Specification
PCR1000WE Single-phase, 1kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR2000WE Single-phase, 2kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR3000WE2 Single-phase 3kVA, Single-phase 3-wire 2kVA, Three-phase 3kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR6000WE2R Single-phase 6kVA/Single-phase 3-wire 4kVA/Three-phase 6kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR6000WE2 Single-phase 6kVA/Single-phase 3-wire 4kVA/Three-phase 6kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR12000WE2R Single-phase 12kVA/Single-phase 3-wire 8kVA/Three-phase 12kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR12000WE2 Single-phase 12kVA/Single-phase 3-wire 8kVA/Three-phase 12kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR18000WE2R Single-phase 18kVA/Single-phase 3-wire 16kVA/Three-phase 18kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR18000WE2 Single-phase 18kVA/Single-phase 3-wire 12kVA/Three-phase 18kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR24000WE2R Single-phase 24kVA/Single-phase 3-wire 16kVA/Three-phase 24kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR24000WE2 Single-phase 24kVA/Single-phase 3-wire 16kVA/Three-phase 24kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR30000WE2R Single-phase 30kVA/Single-phase 3-wire 20kVA/Three-phase 30kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR30000WE2 Single-phase 30kVA/Single-phase 3-wire 20kVA/Three-phase 30kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type
PCR36000WE2R Single-phase 36kVA/Single-phase 3-wire 24kVA/Three-phase 36kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type, with regenerative function
PCR36000WE2 Single-phase 36kVA/Single-phase 3-wire 24kVA/Three-phase 36kVA, AC 0 to 310Vrms, 1Hz to 5kHz, DC0 to ±438V, PWM type

Options (Related products)

  • AC5.5-1P3M-M6C-3S
    Input power cable
    3 single-core cables 5.5 mm2 Length: 3 m M6(for PCR1000WE(Single-phase 2-wire), PCR2000WE(Single-phase 2-wire))
  • AC14-1P3M-M6C-3S
    Input power cable
    3 single-core cables 14 mm2 Length: 3 m M6(for PCR3000WE2(Single-phase 2-wire))
  • AC5.5-1P3M-M5C-4S
    Input power cable
    4 single-core cables 5.5 mm2 Length:3 m M5(for PCR6000WE2R(Three-phase three-wire))
  • AC5.5-1P3M-M5C-5S
    Input power cable
    5 single-core cables 5.5mm2 length:3 m M5 (for PCR6000LE(Three-phase 3-wire), 6000LE2(Three-phase 3-wire), 9000LE, 9000LE2, PCR6000WE2(Three-phase 4-wire), PCR12000WE2(Three-phase 4-wire))
  • AC14-1P3M-M5C-4S
    Input power cable
    4 single-core cables 14 mm2 length: 3 m M5 (for PCR6000LE(Three-phase 3-wire), 6000LE2(Three-phase 3-wire), 9000LE, 9000LE2, PCR12000WE2R(Three-phase 3-wire))
  • AC22-1P3M-M8C-4S
    Input power cable
    4 single-core cables 22 mm2/Length:3 m M8(for PCR18000WE2R(Three-phase 3-wire))
  • AC8-1P3M-M5C-5S
    Input power cable
    5 single-core cables 8 mm2 Length: 3 m M5(for PCR18000WE2(Three-phase 4-wire))
  • AC38-1P3M-M8C-4S
    Input power cable
    4 single-core cables 38 mm2 Length: 3 m M8(for PCR24000WE2R(Three-phase 3-wire))
  • AC14-1P3M-M5C-5S
    Input power cable
    5 single-core cables 14 mm2 Length: 3 m M5(for PCR24000WE2(Three-phase 4-wire))
  • AC60-1P3M-M8C-4S
    Input power cable
    4 single-core cables 60 mm2 Length: 3 m M8(for PCR30000WE2R(Three-phase 3-wire), PCR36000WE2R(Three-phase 3-wire))
  • AC22-1P3M-M5C-5S
    Input power cable
    5 single-core cables 22 mm2 Length: 3 m M5(for PCR30000WE2(Three-phase 4-wire), PCR36000WE2(Three-phase 4-wire))
  • PC01-PCR-WE
    Parallel operation cable
    Parallel operation cable for PCR-WE/WE2 Series Length: 1 m
  • LC01-PCR-LE
    Cable for synchronizing the power switches
    Cable for synchronizing the power switches of the PCR-LE, PCR-WE/WE2.
  • IB07-PCR-WE
    GPIB Interface
    This board enables you to control the PCR-WE/WE2 Series over GPIB.
    *Factory option
  • OP03-KRC
    Base hold angle
    Base hold angle for KRC Series 19″ Decorative racks. These L-shaped fittings (OP03-KRC) secure the base of the rack to the floor. The set includes four main fitting components and the bolts and nuts that secure the fittings to the bases.
  • OP01-PCR-WE
    Option(s) for PCR-WE/WE2 AC Power Supplies
    External Control Connector (for DIGITAL I/O)
  • OP02-PCR-WE
    Option(s) for PCR-WE/WE2 AC Power Supplies
    External Control Connector (for ANALOG I/O)
  • KRB3-TOS
    Bracket
    Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC
  • KRB150-TOS
    Bracket
    Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC
  • KRB6
    Bracket
    Bracket (Inch size) for PCR1000LE, PCR4000M(MA), PCR6000WE2(R)
  • KRB300
    Bracket
    Bracket (Metric size) for PCR1000LE, PCR4000M(MA), PCR6000WE2(R)
  • KRB9
    Bracket
    Bracket (Inch size) for PCR2000LE, PLZ12005WH, PCR12000WE2(R)
  • KRB400-PCR-LE
    Bracket
    Bracket (Metric size) for PCR2000LE,PLZ12005WH, PCR12000WE2(R)
  • OT01-PCR-WE -NEW-
    Output terminal box
    Output terminal box for PCR-WE/WE2 series (18 kVA)
  • OT02-PCR-WE -NEW-
    Output terminal box
    Output terminal box for PCR-WE/WE2 series (36 kVA)
  • AC14-7P0.7M-M5M6 -NEW-
    For 6 k, 12 kVA
    For 6 k, 12 kVA for PCR-WE/WE2 series (0.7 m)
  • AC14-7P1.4M-M5M6 -NEW-
    For 6 k, 12 kVA
    For 6 k, 12 kVA for PCR-WE/WE2 series (1.4 m)
  • AC22-7P0.7M-M6M6 -NEW-
    For 18 kVA
    For 18 kVA for PCR-WE/WE2 series (0.7 m)
  • AC22-7P1.4M-M6M6 -NEW-
    For 18 kVA
    For 18 kVA for PCR-WE/WE2 series (1.4 m)
  • AC22-7P0.7M-M6M8 -NEW-
    For 24 kVA
    For 24 kVA for PCR-WE/WE2 series (0.7 m)
  • AC22-7P1.4M-M6M8 -NEW-
    For 24 kVA
    For 24 kVA for PCR-WE/WE2 series (1.4 m)
  • AC38-7P0.7M-M8M8 -NEW-
    For 30 k, 36 kVA
    For 30 k, 36 kVA for PCR-WE/WE2 series (0.7 m)
  • AC38-7P1.4M-M8M8 -NEW-
    For 30 k, 36 kVA
    For 30 k, 36 kVA for PCR-WE/WE2 series (1.4 m)
  • SD009-PCR-LE/WE
    Power Line Disturbance Immunity Testing Software
    SD009-PCR-LE (Quick Immunity Sequencer 2) is an application software to perform immunity test with our AC power supply, PCR-LE series for Immunity testing standard (IEC61000-4 Series) of EMC standard which complies to Power Line Disturbance Immunity testing, a suite of international specifications concerning power line disturbances.
    *Note: To use this software, the firmware version of the PCR-LE must be 2.0 or later.
  • SD012-PCR-LE/WE
    Avionics Test Software
    Avionics Test Software [SD012-PCR-LE] is a software application that support to the aircraft test standards, and is used to control the PCR-LE/LE2 Series that enables you to conduct the test standards for the MIL-STD-704, RTCA/D0-160 and JIS W0812 standards. Test patterns are library-based, which enables tests to be easily run by simply selecting the wiring configuration and the type of test.
    *Note: To use this software, the firmware version of the PCR-LE/LE2 must be 4.2 or later.
  • SD021-PCR-LE/WE -NEW-
    Remote-control software for the Windows tablet
    Remote-control software for the Windows tablet for PCR-WE/WE2 series
  • Wavy for PCR-WE (SD032-PCR-WE)
    Sequence Creation Software
    Sequence Creation Software for PCR-WE/WE2 series

Downloads

Back To Top
Open chat
1
Need help?
NDTC
Hello :)
Can we help you?