PAD-LA Series

DC Power Supply (Series regulated system, CV/CC) : 9 Models

The PAD-LA Series are renewal version of our long seller models “PAD-L Series” as known for high performance and high reliability of variable DC regulated power supplies used with excellent regulators. The PAD-LA Series has polished features and performance also it has improved the “easy to use” operation by adopting an advanced design and we aim to establish the “New Basic Power Supply” which can be used in all fields of application from the R&D , Quality Control to the Manufacturing site.

Features

Use large LED monitor with high visibility for 4digits display
Output and Set Switch
Putting together of the mode setting switches
OCP (Over Current Protection circuit)
Output Monitoring
Control Terminals

Line Up

Model	Specification
PAD16-100LA	0 to 16V/0 to 100A
PAD36-60LA	0 to 36V/0 to 60A
PAD36-100LA	0 to 36V/0 to 100A
PAD60-60LA	0 to 60V/0 to 60A
PAD72-30LA	0 to 72V/0 to 30A
PAD110-20LA	0 to 110V/0 to 20A
PAD110-32LA	0 to 110V/0 to 32A
PAD250-8LA	0 to 250V/0 to 8A
PAD250-15LA	0 to 250V/0 to 15A

Options (Related products)

PIA4810
Power Supplies Controller
The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled

PIA4820
Power Supplies Controller
The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.

PIA4850
Power Supplies Controller
The power supply controller only for digital control. It is equipped with the USB interface. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.

TU02-PIA
Option(s) for Power Supplies Controller
Terminal Unit for PAN-A series

OP01-PIA
Option(s) for Power Supplies Controller
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions

KRB5-PAD
Bracket
Bracket (Inch size) for PAD-LA(type III)

KRB250-PAD
Bracket
Bracket (Metric size) for PAD-LA(type III)

KRB11-PAD
Bracket
Bracket (Inch size) for PAD-LA(type IV), support rail (one pair) attached

KRB500-PAD
Bracket
Bracket (Metric size) for PAD-LA(type IV), support rail (one pair) attached

Downloads

Datasheet